V6

 

Under the label "Jonsbo - powered by Cooltek" we present high quality cases for demanding users.

The elegant look of the V6 harmoniously imitates the design of popular audio components.

The design of compact ITX enclosures is always a challenge – as it is mandatory to achieve acceptable system temperatures while still fitting in as many components as possible in a very limited amount of space. The design of the V6 consequently follows this specification.

Thanks to the intelligent layout of the inner space of the case, you can install either 4 x 3.5 inch or two each 2.5 and 3.5 inch HDD/SSD. Two PCI expansion slots are available for the installation of graphics cards. It can accommodate VGA cards with a maximum length of about 200 mm.

The compact case is compatible with standard ATX power supplies. The power supply is mounted on the housing front, the power supply then looped to the rear panel. When using ATX power supplies, CPU coolers with a maximum height of about 65 mm can be installed.

Especially for extensive systems with powerful processors and larger sized coolers we would generally advise the use of external power supplies or SFX power supplies, in order to maintain the best possible compatibility.

The advanced ventilation system of the V6 is especially designed for minimum noise and optimum ventilation. For an effective cooling system both side panels are perforated in the lower area, which allows an improved air supply, in particular for the CPU cooler. In addition, the chassis front is designed in permeable mesh fabric, which effectively supports efficient ventilation.

A particularly quiet running 140 mm fan is installed at the back of the case, which ensures constant air exchange inside the case. If necessary, up to three 60 mm fans can be mounted behind the front cover, increasing the air flow significantly.

In the upper part of the case front one USB 3.0 and one USB 2.0 port, as well as the obligatory HD audio ports (mic and audio) are available.

The production effort for this case is enormous and equivalent to a "full-blown" mid-tower, with only the individual parts being smaller. With the particularly precise manufactured components, made by most modern machinery, ensures a high quality, which is reflected in the extremely strong impression with narrow gaps. The one-piece lid is made of the “V6” is made of 0.8 mm thick SECC steel; the chassis has a thickness of 0.6 mm. This gives the compact chassis an enormous stability.

To assemble the hardware only the one-piece case cover must be removed. Two HDD holders can be easily removed by loosening four screws. Both holders can accommodate two mass storage devices. The "primary" disk holder (see manual) allows the decoupled mounting of either two 3.5 inch or two 2.5 inch HDD/SSD. The “secondary” holder is equipped for two 3.5 inch or one 2.5 inch and one 3.5 inch HDD/SSD.

Four “Hifi style"  rubber feet  are included which give the case a particularly classy look and effectively decouple it at the same time, by catching resulting vibrations. The feet are durable and stable.

Please note that no 5.25 inch drive bay for the installation of optical drives is available.

Depicted hardware is not included.

 

Available downloads:

Download Manual V6
 
 

Specifications

Case type HTPC / Mini-ITX
Form Factor Motherboard Mini-ITX
Form Factor PSU ATX
3.5 inch drive bay internal 4 x
2.5 inch drive bay internal 2 x optional
Case fans (front) 3 x 60 mm (optional)
Case fans (rear) 1 x 140 mm
Height x Width x Depth 210 x 250 x 240 mm
Weight 2,6 kg
Material 0.8 mm / 0,6 mm SECC steel
Maximum height CPU-coolers 65 mm
Maximum length length VGA cards 200 mm
Code 4250140364906
Manufacturer number JB V6 S