FR-131 (RGB) - Set of 3


With the FR-131 (RGB) - Set of 3 Jonsbo presents an RGB fan set consisting of three RGB fans, an internal controller and a practical slot cover. The focus was aimed at impressive LED and the fans offer a very attractive design with uniform and clean light effects.

The fans combine high airflow with very impressive RGB-LED effects. A total of 18 long-life high-light-LEDs are installed in the fan frame. With the included controller the user can choose between different colors and lighting modes.

The controller offers a total of 12 different modes: Color circle of 256 different colors within a time span of approx. 50 seconds; single color mode Red, Green, Blue, White, Yellow, Purple, Pink, Cyan, Orange; color circle (9 colors), 7 seconds per color; light off. Using the LOCK key, users can stop the color circle and lock in one of the colors, while a second click will “unlock” the color circle once again.

Using the controller, it is possible to change the fan speed of the connected fans. There is a high-speed mode (1,500 rpm, 25.4 dB(A), 68.3 m³/h) and a low-speed mode (1,000 rpm, 18.0 dB(A), 45.4 m³/H). It is also possible to switch off the fans.

Included is a slot cover, allowing it users to regulate the RGB fans without the need to open up the case.



Height 120 mm
Width 120 mm
Depth 25 mm
Voltage 12 Volt
Fan speed 1,000 - 1,500 rpm
Rated power 3.6 W
Airflow 45.4 - 68.3 m³/h
Noise 18.0 - 25.4 dB(A)
Bearing Hydraulic Bearing
Connector RGB-Controller (S-ATA Power)
Code 4250140344076
Manufacturer number FR131 RGB
Order number 200400407