K2 3.0



Our K2 is a real classic and is certainly one of the most popular models in our product portfolio. In this version, the case features two front USB 3.0 ports built (internally connected).

While the visual appearance of the tower has remained untouched, you can find a completely new interior behind the attractive exterior. One of the main features of the K2 3.0 is the particularly attractive price-performance ratio.

The K2 3.0 offers a particularly attractive appearance in elegant black piano lacquer combined with a black and silver glossy front. The chassis is made of 0.6 mm steel and is carefully painted silver.

Visually the black high gloss finish dominates, standing at the front in striking contrast to the silver applications. In addition the blue lit rim of the silver power button in the front represents an attractive visual complement. The high-quality case features a very stable and very well-made chassis - folded and deburred edges protect from cuts during hardware installation.

The user has four externally accessible 5.25 inch drive bays available. An external 3.5 inch drive bay allows the installation of such a floppy drive, a fan controller slot or a 3.5 inch card reader. In series the first 5.25 inch drive bay is equipped with a flip-down panel. This creates a uniform color appearance which is maintained even when using a different colored optical drive. It can be used with all conventional drives that use tray drawer. The first two 5.25 inch drives will be assembled via convenient quick-lock fasteners without the use of screws or tools.

The four internal 3.5 inch bays rotated 90-degree have practical aluminium trays, in which the hard drives are easily installed. Unless a particularly intense HDD cooling is desired, the slots can be equipped with 60 mm x 60 mm x 10 mm fans.

The power supply is mounted at the bottom of the K2 3.0. As it draws in cool air from the, the sound levels are reduced and the life expectancy of the power supply is increased. To prevent the suction of dust particles into the PSU, an easy-to-clean dust filter is mounted under the bottom.

The complete ventilation concept is well thought-out and very efficient: in the front, a 140mm fan is pre-installed which draws cooling fresh air from the outside into the interior of the housing. Air intakes in the front panel also support the effective supply of fresh air. The system sufficiently obtains fresh air - existing hard drives are cooled effectively at the same time. On the case bottom - if desired, an additional 120 mm or 80 mm fan can be mounted.

A 92 or 120 mm fan can be fixed to the chassis backplane, which can provide an effective dissipation of heated air. In the left side panel of the tower a total of two additional 92 or 120 mm fan for maximum ventilation can be used optionally. The cooling performance of existing VGA cards and CPU coolers can be clearly measurable improved and optimized by assembling the two air holes in the side panel.

For a simplified installation of external water cooling components, the K2 has two rubber hose outlets in the rear panel.

Below the external 3.5-inch bay the easily accessible I / O ports can be found:

    2 x USB 3.0
    1 x USB 2.0
    1 x e-SATA
    2 x HD Audio (Speaker, Mic)

Peripherals can be connected quickly and easily from the front.

The Cooltek K2 is designed for all PS/2-ATX conventional power supplies. It can be used to incorporate both ATX and Micro ATX motherboards. There is a 30 cm long extension cable for 4-pin Intel P4 (CPU power) 12V power connector to motherboard included.

Cooltek K2 Tower


Case Type Midi-Tower
Form Factor ATX
5.25 inch drive bay external 4 x
3.5 inch drive bay external 1 x
3.5 inch drive bay internal max. 4 x
2,5" inch drive bay internal 4 x optional
Installation option for fans 5 x
Fans included 1 x
Height 438 mm
Width 190 mm
Depth 488 mm
Weight 5.7 kg
Material Stahl
Maximum VGA Card Length 280 mm
Maximum height of CPU coolers 160 mm
Code 4250140345677
Manufacturer number CT KII 3.0 FB

Color selection