Skiron

 

fudzilla-top-value_80520534db14772hardwaremax_silvermy_garage_5starstechnic3d_silber_80520534ddb634f benchpl_vier

The Skiron in particular impresses with its excellent value for money, with extensive equipment and lots of practical details. Particular emphasis was placed on a high degree of flexibility in the hardware installation; this particular includes the fan assembly and the variable drive concept.

Behind the front cover two 120 mm LED fans are installed, which are fitted with dust filters to prevent the intake of dust particles. Three external 5.25 inch bays for the tool-free installation of optical devices are available.

On the sloped upper edge of the case front, six USB ports can be found - 2 x USB 3.0 Super Speed and 4 x USB 2.0 – as well as the mandatory audio connectors.

The generous MESH-side panel is one of the highlights of the Skiron. It allows the installation of CPU cooler with a maximum height of 175 mm. All known CPU cooler can therefore easily be accommodated in the case!

Up to four 120 mm or a single 180/200/220/230 mm fan can be installed in the side panel. Please note that the maximum height of the CPU-cooler will be limited when installing fans in the side panel. The 170 mm fan under the top cover can be replaced by two 120 mm or 140 mm fans. In total, up to 10 fans can be accommodated in the Skiron.

Inside the Skiron shows its real strengths. The rubberized cable guides are located at strategic positions in the motherboard tray to allow as tidy a system as possible. For easy installation and removal of the CPU-cooler, we included a generously sized mounting hole in the motherboard tray. You can find air holes located below the CPU socket, as modern CPUs are very hot-tempered and the underside of the CPU socket can be very hot - thus the heat generated there can effectively be dissipated. Similar air holes are located behind the hard disk drives to allow effective ventilation.  

Another highlight of the Skiron are the two recessed USB ports above the uppermost 5.25 inch bay. They are perfect for USB devices, like wireless adapter or Bluetooth dongles, which rarely need to be removed. The risk of damaging those is minimal, thanks to the protected location of the connectors.

Our Skiron is equipped with two HDD-cages for up to five 3.5 inch drives, as well as a single cage for up to 3 2.5 inch HDD/SSD. The hard disk drives are mounted using rubber suspension; the trays can also accommodate 2.5 inch drives. To ensure optimal utilization of the case depth, the middle HDD cage can be removed with little effort and be mounted at the case bottom in the dedicated secondary mounting rail. It is possible to install VGA cards with a maximum length of up to 430 mm in the Skiron. If you wish, you can remove the mounting rail and install a 120 or 140 mm fan at the case bottom.

The PSU is bottom-mounted, appropriate vents – covered by with dust filters - are provided to allow the intake of fresh air from outside.

The Skiron tower includes as standard a 2-channel fan controller in the upper front area to be used with the included case fans. A total of up to six fans can be controlled step-less. Please note that the illumination of the top and front fans is diminished in the down-regulated state. With our innovative "advanced modular ventilation concept", the system offers the possibility to configure the ventilation of your PC system according to your wishes and to choose between different fan combinations. It is for example possible to combine the front fans with the rear fan and regulated the top fan separately.

The two external USB 3.0 ports (Type A female) can be connected externally to the motherboard. For this, the cables can for example be led through the water cooling hose guides, as shown in the picture, and then connected to the external USB 3.0 ports of the motherboard or an extension card. It is of course mandatory, that such connections are available. We also included an adapter kit, which can be used to connect the cables to an internal 19-pin connector. The USB 3.0 ports are of course also compatible to USB 2.0 and USB 1.1 standards, but at a reduced bandwidth.

 
Cooltek Skiron "More space for You" Das Flagschiff: Cooltek Skiron Tower
 

Specifications

Case Type Midi-Tower
Form Factor ATX, M-ATX
5.25 inch drive bay external 3 x
3.5 inch drive bay internal 5 x
2,5" inch drive bay internal 3 (8) x
Installation option for fans 10 x
Fans included 4 x
Height 510 mm
Width 215 mm
Depth 530 mm
Weight 9.1 kg
Material 0.7 mm Steel
Maximum VGA Card Length 430 mm
Maximum height of CPU coolers 175 mm
Code 4250140356567
Manufacturer number CT SKI BR

Color selection